项目创意

DIY Arduino第二弹

字号+ 作者:duino123.com 来源:未知 2016-04-28 14:28 我要评论( )

看了本例你就会知道,除了去淘宝买10来块的盗版外,你完全可以自己DIY一个自己的Arduino,至于价格,呵呵,也得10来块devil

PLCLIVE.COM注:
看了本例你就会知道,除了去淘宝买10来块的盗版外,你完全可以自己DIY一个自己的Arduino,至于价格,呵呵,也得10来块
devil











Step 1: 元件清单


1) copper clad board
2) sand paper
3) drill bits-0.8mm
4) Saw blade
5) ferrous chloride 
6) plastic box
7) water
8) iron box
9) Atmega 328pu /Atmega 328p-pu
10) 16mhz crystal -1
11) 22pf capacitor-2
12) 10k resistor-1
13) 1k resistor -2 
14) Red Led-3mm -1
15) Blue Led-3mm -1
16) male headers -2stick
17) female header -1
18) push button-1
19) 104capacitor -2
20) soldering iron
21) flux
22) soldering lead 



Step 2: 覆铜板










Take a plane copper clad board scrub it with Sand paper for 1min till it becomes shiny,take a Master paper(or any glossy paper) 
download arduino clone PCB pcb on vonkonow.com/wordpress/2012/10/nanino-the-diy-friendly-arduino/
print it on master sheet only by using LASER printer,once it is done , now place the printed PCB paper on
copper clad and iron it for 10min carefully don't over heat it, now carefully remove the paper by using cold water ,
if any track is missing use marker to cover it ,now prepare ferrous chloride solution use plastic box to mix solution, 
then dip the copper clad board on ferrous chloride solution ,now leave it for 20min ..afterwards take it out and wash it with water carefully and scrub it with sandpaper ..now PCB is ready

take a drill machine and drill it with 0.8mm drill bit

Step 3: 焊接元件



  

As per the circuit diagram (website : vonkonow.com/wordpress/2012/10/nanino-the-diy-friendly-arduino/ ) solder all the components !! it will take nearly 20mins ...use 2 jumpers which is needed for this PCB..

Step 4: 利用FTDI转换器烧录程序



   

Once soldering is Finished ,it is ready to be programmed ,use FTDI converter which has 6pins on it..and write any program to Arduino !!

Step 5: 上传Blink程序并测试!!!





 


如需更详细资料,如有好资源分享,请加入QQ交流群:214461008

欢迎阅读,欢迎转载,不用注明出处!本站只提供入门和进阶资料,做您学习的小伙伴!

老司机也欢迎光临指导!有好内容请加群:214461008 不要看声明了,看内容吧!

相关文章
  • 利用电视遥控器控制Arduino

    利用电视遥控器控制Arduino

    2016-05-13 17:27

  • 几百个国外DIY网站

    几百个国外DIY网站

    2016-05-08 01:08

  • ESP8266 Arduino气象站

    ESP8266 Arduino气象站

    2016-04-28 18:44

  • 简化到不能再简化的Arduino

    简化到不能再简化的Arduino

    2016-04-28 16:50

网友点评
Arduino